Click image to view full size image
Eastern Europe - Ukrainian
200 L | 60 L | 20 L | 5 L | 4 L | 1 L
WOLVER UltraTec SAE 0W-40 is a high-performance HC-Synthetic multigrade fuel-economy oil for diesel and petrol car engines. Specially selected HC-Synthetic base oils and highly effective long-term protective additives give this high-performance motor oil its excellent driving characteristics.
WOLVER UltraTec SAE 0W-40 with performance reserves for sporting and environmentally conscious drivers. The fuel economy leads to a reduction in CO2 emissions.
SPECIFICATIONS:
SAE 0W-40
API SN/CF/EC
ACEA A3/B4
MEETS THE REQUIREMENTS OF:
BMW Longlife-01
MB 229.3
VW 502.00, 505.00
Characteristics
• High wear protection at all operating conditions
• Excellent viscosity-temperature behaviour
• Minimal frictional loss
• Very high cleaning capability
• Low volatilization loss
• High oxidation and temperature stability
Effects
• Optimum long-term protection for all engines
• Reduces fuel comsumption according API EC and reduces exhaust emission
• Excellent cold starting properties - rapid supply of all points of lubrication
• Very good operating reliability
• Optimal engine cleanliness
• Low oil consumption
• High margin of performance and high product stability, also at extended oil change intervals
• All-year operation
• Optimal oil pressure
Utilization
• High-performance and normal four-stroke petrol engines
• with multivalve-technology
• with turbo charging
• with catalyst technology
• Passenger car diesel engines
• Suction diesel
• Turbo diesel
• with CDi-technology
Disposal
• WOLVER HighTec SAE 0W-40 is assigned to category 2 of used oils and thus is free for disposal.
Miscibility
• WOLVER HighTec SAE 0W-40 is fully compatible with conventional HD oils and can be mixed if necessary. In orderable to fully utilise the advantages of WOLVER HighTec SAE 0W-40, however, the use of WOLVER HighTec SAE 0W-40 is worth recommending.
Data table
|
PROPERTIES
|
UNIT
|
TYPICAL INDICATORS
|
|
Specific weight at 15°C |
kg/m³
|
851
|
|
Viscosity at -30°C |
cP
|
6200
|
|
Viscosity at 40°C |
cSt
|
78
|
|
Viscosity at 100°C |
cSt
|
13,6
|
|
Viscosity index |
179
|
|
|
Flash point COC |
°C
|
220
|
|
Pour point |
°C
|
-36
|
Wolver HighTec 0W-40
